Vol. 14 No. 4 (2018): Al-Khwarizmi Engineering Journal, December, (2018)

View Vol. 14 No. 4 (2018): Al-Khwarizmi Engineering Journal, December, (2018)
Published: 01-12-2018

Articles

  • Experimental and Finite Elements Analysis Study of Warming Effect on Deboned Force for Embedded NiTinol Wire into Linear Low Density Polyethylene

    Samir Ali Amin, Ali Yasser Hassan
    1-8
    DOI: https://doi.org/10.22153/kej.2018.03.005

  • Crack Growth Behavior through Wall Pipes under Impact Load and Hygrothremal Environment

    Ali Jamal Khaled, Ahmed Abdul Hussain
    9-15
    DOI: https://doi.org/10.22153/kej.2018.05.001

  • Study the Effect of Different Percentages of Natural (Orange Peels and Date Seeds) and Industrial Materials (Carbon and Silica) on the Mechanical and Thermal Properties of Polymeric Reinforced Composites

    Haydar Abed Dahad, Sameh Fareed Hasan, Ali Hussein Alwan
    16-23
    DOI: https://doi.org/10.22153/kej.2018.04.001

  • Enhancement of Hybrid Solar Air Conditioning System using a New Control Strategy

    Ahmed Abed Mohammed, Raed Ayad Abduljabbar
    24-33
    DOI: https://doi.org/10.22153/kej.2018.04.002

  • Vibration Analysis of Cross-Ply Plates Under Initial Stress Using Refined Theory

    Ibtehal Abbas Sadiq, Kani Hussein Bawa
    34-44
    DOI: https://doi.org/10.22153/kej.2018.05.002

  • The Influence of Alkaline Treatment of Recycled Natural Materials on the Properties of Epoxy Resin Composites

    Hamza M. Kamal, Mohammed J. Kadhim, Raeid K. Mohammed
    45-53
    DOI: https://doi.org/10.22153/kej.2018.05.003

  • Design and Implementation of an Automatic Control for Two Axis Tracking System for Applications of Concentrated Solar Thermal Power

    Saad Tami Hamidi, Jamal Abdul-Kareem Mohammed, Laith Muhsin Reda
    54- 63
    DOI: https://doi.org/10.22153/kej.2018.01.010

  • Effect of Using Combined Square Nozzle & winglet with Helical Tape on Thermal Characteristics in Tube Heat Exchanger

    Hisham Assi Hoshi, Israa S. Ahmed, Abdulmunem R. Abdulmunem
    64- 71
    DOI: https://doi.org/10.22153/kej.2018.05.004

  • Experimental and Numerical Investigation for Simulation of Thermophysical Properties for Polypropylene 575 Polymer Melts in Single Screw Extruder

    May M. Ismail, Sami D. Salman, Shatha K. Muallah
    72- 82
    DOI: https://doi.org/10.22153/kej.2018.04.003

  • Co-digestion of Shumblan with Different Wastes as a Source for the Biogas Production

    Duaa A. Farhan, Farkad A. Lattieff, Mohammed A. Atiya
    83- 91
    DOI: https://doi.org/10.22153/kej.2018.04.004

  • Classical and Statistical Optimization of Medium Composition for Promoting Prodigiosin Produced by Local Isolate of Serratia Marcescens

    Sura Jasem Mohammed, Khalid Jaber Kadhum, Khalid waleed Hameed
    92- 102
    DOI: https://doi.org/10.22153/kej.2018.03.006

  • Numerical Simulation of Unsaturated Soil Water Flow from a Trickle Point System, Considering Evaporation and Root Water Uptake

    Lina Ali Khalil, Maysoon Basheer Abid
    103- 114
    DOI: https://doi.org/10.22153/kej.2018.05.005

  • Surface Roughness Prediction for Steel 304 In Edm Using Response Graph Modeling

    Shukry H. Aghdeab, Nareen Hafidh Obaeed, Marwa Qasim Ibraheem
    115- 124
    DOI: https://doi.org/10.22153/kej.2018.05.006

  • Effect of Al2O3 Particles and Precipitation Hardening on the Properties of Cast 332 Aluminum Alloy

    Akeel Dhahir Subhi, Hussein Najim Abdullah
    125- 132
    DOI: https://doi.org/10.22153/kej.2018.05.007

  • Mechanical Properties of Burnished Steel AISI 1008

    Zeyad D. Kadhim, Mohammed Abdulraoof Abdulrazzaq, Wassan Suheil Hussain
    133- 142
    DOI: https://doi.org/10.22153/kej.2018.06.005